|
WHEELS
 
|
These
are
used
to
Easily
Assist
in
moving
the
Dog
Walk,
A-frame
&
Teeter
from
one
location
to
another!
They
allow
one
person
to
move
each
piece
of
equipment
by
themselves
in
most
cases.
A
choice
of
standard
&
balloon
wheels
are
available
for
all
types
of
surfaces.
|
| Construction: |
Axle is
made of
Steel.
Wheel
Std is
solid
rubber,
Balloon
is
rubber
with a
tube. . |
| Finish: |
Metal is
sandblasted
and
powder
coated |
| Special: |
Shipping
is
Included/NO
Charge |
| Weight: |
2 lbs
std / 10
lbs
balloon |
 |
Standard Wheels = Call per
pair
Balloon Wheels = Call per
pair
|
CARRIAGE
When
used
with
a
set
of
wheels
allows
one
person
to
move
the
A-frame
while
still
at
full
height
&
the
Dog
Walk
with
the
support
legs
installed.
A
choice
of
standard
&
balloon
wheels
are
available
for
all
types
of
surfaces.
| Construction: |
Extended Handle and Axle is made of Steel. Wheels used are: Std are solid rubber, Balloon are rubber with a tube. |
| Finish: |
Metal is sandblasted then Powder Coated. |
| Special: |
Works with the A-frame & Dog Walk |
| Weight: |
12 lbs std / 15 lbs balloon |
|
With Standard Wheels
Call per
pair
With Balloon Wheels
Call per
pair |
WOBBLE BOARD
Photo Coming Soon!
|
This board is a training aid for the teeter totter and will assist in building rear end muscles for stability on uneven or wobbly surfaces.
|
| Construction: |
Made of ¾ inch Marine Plywood |
| Finish: |
Marine plywood is primed, painted and textured. |
| Special: |
The wood has rounded edges & the corners are rounded to allow for smooth wobbling going to the left or right. |
| Weight: |
30 lbs |
|
Cost:
Call |
TIPPI BOARD
Photo Coming Soon!
|
This wood plank is a training aid for the teeter totter.
|
| Construction: |
2 x 12 Plank & Steel for the pivot and height adjustment |
| Finish: |
Wood is premiered, painted & textured. The metal is sandblasted then powder coated. |
| Special: |
Easily adjusts to 2 heights. |
| Weight: |
30 lbs |
|
Cost:
Call |
|
WEAVE GUIDES
Photo Coming Soon!
| |
|
| Construction: |
Light weight Steel Solid rod in the middle with a tube on each end. |
| Finish: |
Metal is sandblasted then powder coated. |
| Special: |
Each end slips over the pole and will not fall off or break (unlike plastic style) |
| Weight: |
1-1/2 lbs each |
|
Cost
Call |
|
SANDBAGS/TUNNEL HOLDERS
| Construction: |
Made of Heavy Duty Vinyl. |
| Special: |
The weight is easily changed by adding or removing sand. Each pair of sandbags have a double strap which allows better hold than with just one strap. No Velcro used which can get clogged with dirt, sand or grass. |
| Weight: |
Shipping is Included/No Charge |
|
1
pair
of
sandbags
Call |
| |
|
METAL TUNNEL HOLDERS
| |
|
| Construction: |
3/16th" x 1-1/2" flat bar. 2 each nylon webbing straps with Quick/Easy release buckles |
| Finish: |
The metal is sandblasted then powder coated. |
| Special: |
Each tunnel holder has 2 straps which allows better hold & positioning than with just one strap. Velcro is NOT used because it can get clogged with dirt, sand or grass. Has 4 holes for easy securing to the ground. |
| Weight: |
10 lbs |
|
Cost
Call
each |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
